Take the beauty and brawn of the VPL-FX40 and turbo charge it and you have the VPL-FE40, Sony's new SXGA+ (1400 x 1050) resolution projector.

Delivering an extremely bright 4,000 ANSI lumens at SXGA+ Resolution and featuring a unique, new angular design body, the VPL-FE40 is an excellent projector for detailed high-impact multimedia presentations in almost any venue.

The VPL-FE40 Installation Projector is one of the first to incorporate our new BrightEra Inorganic alignment layer 0.79-inch LCD Panels manufactured by the Sony Panel Group.

BrightEra High Temperature Polysilicon (HTPS) LCD panels represent the very latest technology in precise liquid crystal alignment, offering increased reliability and higher picture quality. In comparison to conventional LCD panels, BrightEra technology greatly augments the panel's resistance to ultraviolet light, which is a key factor in panel reliability. In addition, an increase to the aperture ratio from traditional panels enables the projectors to produce an incredibly bright image, while avoiding colour separation or the 'rainbow effect' of the final image that can affect some other projection technologies.

The VPL-FE40 offers SXGA+ resolution to project clear and crisp images even on large screens up to 600 inches (measured diagonally). With its outstanding functionality, simple operation and network capabilities, the VPL-FE40 projector provides you with the tools to perform seamless presentations.

The projector's ability to accept a broad array of signals, including those from sources equipped with the latest High-Definition Multimedia Interface (HDMI), gives you a wider choice of content so as to increase the dynamics of your presentations.

Also available: VPL-FE40L lens-less version offers a choice of 3 bayonet lenses to meet the requirements of your specific applications.

Features:

* Networking Presentations: When the VPL-FE40 projector is installed on a LAN via RJ45, presentations can be projected from any PC on that network - whether connected via a LAN cable or wirelessly.

* New feature High-Speed Image Transfer over IP Networks: Because the VPL-FE40 projector employs efficient compression and transmission techniques, they can receive and project images via IP networks for effective presentations from any networked PC.

* Monitor Out: The VPL-FE40 projector can display the image simultaneously on a large screen and on an additional monitor (via a 15-pin D Sub connection), so that the user can face the audience and still see the information being shown.

* Low Fan Noise: For an undisturbed presentation, quiet operation is very important. The noise level of the VPL-FE40 is 28dB in low mode which is considered less than a whisper.

* RS-232C: Connections include an RS-232C port for control of the projector.

* Password Protection: When this function is activated a password is required to use the projector (if the password is lost, Sony is able to retrieve it).

* Control Panel Lock: This function locks the controls on the top and side of the projector, to prevent unauthorised or unintentional use of the controls. Functionality can be switched "on" or "off".

* Off and Go: No cool down time needed, just switch off and pack away! The fan continues to cool the VPL-FE40 after the power supply is removed, enabling users to unplug the projector immediately after use, without damaging the lamp or optics. Other projectors need to remain connected to the power supply to cool the projector after use.

* Direct On / Off: Ceiling mounted projectors notoriously remain on after the meeting concludes and the attendees leave the room which in turn burns unnecessary hours on the lamp and electricity. The VPL-FE40 can be set to skip the standby mode, so that it can be turned on / off directly using a main switch.

* Power Zoom/Focus/Picture Shift (Horizontal and Vertical): The Zoom, Focus, and Horizontal and Vertical Picture Shift functions available with the projectors supplied power-operated lens and optional lenses (except VPLL-1008) can be controlled both from the projector control panel and the supplied Remote Commander unit. Images can be easily adjusted to the desired settings both during installation and when the projector is in use.

* ID Function for Multi-Projector Installation: Multiple Projectors, one Remote Commander! VPL-FE40 projectors have a built-in ID function, so each projector can be controlled independently from a single Remote Commander unit.

* ECO INFO: Halogenated flame retardants are not used in cabinets or printed wiring boards. Corrugated cardboard is used for the packaging cushions. Standby power consumption: 0.5 W.